MacBook Air A3133 New Zealand screen replacement – Applefix & Tech Engineers

Macbooo Air 2024 M3 Damaged screen replacement guide

https://www.youtube.com/watch?v=lbsoazamqds

MacBook screen repair damaged in Hamilton New Zealand

How do I change the LCD screen damaged by MacBook Air Air A3113? Watch this video to repair the MacBook Air 2024 M3 LCD screen. Or call 078394111 or visit 937 Victoria Street Hamilton New Zealand for the MacBook A3113 screen replacement.

GENERAL GUIDE How to change the MacBook Air 2024 LCD screen.

Changing the LCD screen on the MacBook (A3113 or similar model) requires precision and maintenance. Below is a general guide to help you through the process. Note that the right steps can vary a little depending on a particular Macbook model, so it’s a good idea to consult with a guide to repair or special video for your device (for example, from IFIXIT).

Tools you need:

Pentalobe P5 Screwdriver (For Macbook Case screws)

Torx T3 Screwdriver (for Display screws)

Screwdriver Phillips #.000

Spudger or plastic opening tool

Tweezers

Suction handle (optional, to lift the screen)

LCD screen replacement (compatible with your Macbook model)

Anti-static wrist rope (recommended)

Steps to change the LCD screen:

1. Down and prepare

Turn off your macbook completely.

Unplug all cables and peripherals.

Your self uses anti-static wrist ropes to avoid damage to internal components.

2. Remove the lower cash

Use the Pentalobe P5 screwdriver to remove the screw on the lower cash.

Think of it carefully and set aside and set aside.

3. Remove the battery

Find battery connectors on the logic board.

Use spudger or plastic tools to release the battery connector gently. This prevents unintentional power flow during repair.

4. Remove the display unit

Find a screen cable near the hinge area.

Remove the display cable carefully (video cables, camera cables, and antenna cables if it applies) using spudger.

Use the Torx T3 screwdriver to remove the screw that secures the hinge display on top of the cash.

Gently remove the display unit from the MacBook.

5. Remove the LCD screen from the display unit

Place the screen assembly facing down on a clean and soft surface.

Use the Torx T3 screwdriver to remove the screw around the edge of the screen bezel.

Separate carefully the bezel from the LCD screen using a spudger or plastic tool.

Remove any cable that connects the LCD to the display unit (for example, a back lights cable).

Remove the screws that secure the LCD to the screen house and lift the LCD carefully.

6. Install the new LCD screen

Place the new LCD screen into the screen house.

Re -connect any cable (for example a back lights cable) and tighten the LCD with screws.

Preattach bezel and tighten with screws.

7. Reattach Reslige Display

Align carefully the view of the display assembly with the MacBook top casing.

Secure the hinges with Torx T3 screws.

Re -connect the display cable (video cable, camera cable, etc.).

8. Re -connect the battery and collect again

Re -connect the battery connector to the logic board.

Place the lower kasing again and fasten with the Pentalobe P5 screw.

9. New Screen Test

Your MacBook power to ensure the new LCD screen is functioning properly.

Check the quality of the display, touchpad functionality, and other problems.

Tips:

Take photos or notes during demolition to help reinstall.

Be soft when handling cables and connectors to avoid damage.

If you are not sure about any steps, consult professionally or see detailed repair guidelines.

If you are not comfortable making this yourself, consider bringing your macbook to Applefix Hamilton New Zealand www.applefix.co.nz or send your device, follow the instructions here